The member photo gallery is now integrated and live!!  All user albums and pictures have been ported from old gallery.


To register send an e-mail to admin@bmwr65.org and provide your location and desired user name.

« previous next »
Pages: [1]

Author Topic: /7 Seat  (Read 1603 times)

RSMike

  • Guest
/7 Seat
« on: July 03, 2011, 09:36:03 AM »
Purist's may not approve but to replace my badly corroded  brown seat, I went with a new /7 black seat, it meant losing the cowl but I find the grab rail is handy with bungy cord for carrying stuff. The seat is nice and firm and quite comfortable.

I still have the old seat and cowl and will look into restoring.

Logged

Offline Bob_Roller

  • Global Moderator
  • Mt. Olympus Resident
  • *****
  • Posts: 9121
  • -7 hours GMT
Re: /7 Seat
« Reply #1 on: July 03, 2011, 09:40:09 AM »
It looks real good, did you have to alter the hinge mounting points and seat lock pin ?
« Last Edit: July 03, 2011, 10:43:16 AM by Bob_Roller »
Logged
'81 R65
'82 R65 LS
'84 R65 LS
'87 Moto Guzzi V65 Lario
'02 R1150R
Riding all year long since 1993 .
I'll give up my R65, when they pry my cold dead hands from the handlebars !!!!!

RSMike

  • Guest
Re: /7 Seat
« Reply #2 on: July 03, 2011, 10:35:41 AM »
Quote
It looks real good, did you have to alter the hinge mounting points and seal lock pin ?

No, though I struggled with it for a while, and thought the lock pin was the problem, but actually it was the rear fender, I had to lower the fender slightly with washers ( steel and rubber, see below).
I also had to trim a piece off the rim of the little box that sits over the battery, then it worked fine.

Though when the seat first arrived (http://www.bmwbayer.de/Seat-with-rail-/7-models-cross-stamping-cover.html), I was really scratching my head, it turned out they had sent the wrong seat ( a /6), but once that was established they sorted it out pretty quickly.





PS:The white BMW roundel does not come on the seat, I did that myself using a stencil sourced on ebay.

« Last Edit: July 03, 2011, 12:17:25 PM by RSMike »
Logged

Offline montmil

  • Mt. Olympus Resident
  • ****
  • Posts: 8371
Re: /7 Seat
« Reply #3 on: July 03, 2011, 11:06:55 AM »
Quote
It looks real good, did you have to alter the hinge mounting points and seat lock pin ?

Ditto on what Bob asked. Datsa nica lookin' butt pad, mike.[smiley=thumbsup.gif]

Monte
Logged
Monte Miller
Denton, TEXAS
1978 BMW R100S
1981 BMW R65
1983 BMW R65
1995 Triumph Trophy
1986 VW Cabriolet

Offline Rob Valdez 79 R65

  • Newbie
  • *
  • Posts: 96
  • I Love YaBB 2!
Re: /7 Seat
« Reply #4 on: July 03, 2011, 10:35:15 PM »
Impressive!
Logged

Offline Bengt_Phorqs

  • Mt. Olympus Resident
  • ****
  • Posts: 1419
  • There are no wrong turns on a motorcycle
Re: /7 Seat
« Reply #5 on: July 04, 2011, 05:38:24 PM »
Very nice, and a good price also. [smiley=tekst-toppie.gif]

 I think I'll check out the ebay stencil.
Logged
Bengt Phorqs, Jake R90/6, R80/7, R1200RTw, Moto Guzzi California EV , Triumph TR250W, Yamaha TY250A Trials, Suzuki DR650

RSMike

  • Guest
Re: /7 Seat
« Reply #6 on: July 05, 2011, 01:55:16 PM »
Quote
Very nice, and a good price also. [smiley=tekst-toppie.gif]

 I think I'll check out the ebay stencil.

Here is a the ebay link for the guy in Italy who does the stencils:
http://cgi.ebay.ie/BMW-R-90-65-45-stencil-seat-sitzbank-/120745793584

I got a very fast delivery from him ( under a week), He supplies two stencils which is handy if you mess up on the first attempt, I did by trying to use a permanent ink marker first time (stupid idea, but I found out quickly)

Second time I used a rattle can spray with a good few light coats to build up. Use lots of masking to cover all of th erest of the seat and anything else in the vicinity.

As the instructions say, have a blade handy to help peeling the stencil from the backing, The middle holes in the BMW "B" are guaranteed to come free and you will need to position with the blade.

But all in all, not too difficult.
« Last Edit: July 05, 2011, 01:56:12 PM by RSMike »
Logged

Offline trips

  • Lives in Foothills of Mt. Olympus
  • **
  • Posts: 184
  • Now I can ride in snow!
Re: /7 Seat
« Reply #7 on: July 06, 2011, 05:49:33 PM »
Looks great, I recently painted my bike black, not thinking about the seat, it looks kind of funky, but I will try dying it, as someone here suggested, it's in perfect condition, just...well.... brown.
Logged
1980 BMW r65/side car
2010 Triumph Rocket III Touring
2002 Triumph Sprint ST 955i
2004 K1200GT
2004 CBR1000RR
1998 Honda Super Blackbird
2001 Triumph TT600

Offline NorR65

  • Lives in Foothills of Mt. Olympus
  • **
  • Posts: 107
  • I Love YaBB 2!
Re: /7 Seat
« Reply #8 on: September 04, 2011, 03:10:38 AM »
I too have bought i identical seat for my R65 1981.
It will not fit even if I lower the rear fender. My rear sub-frame has i different part number than a 1980, do somebody know if it is only the number which is different? I really like the look of the old seats.

For the moment I use a comfort-seat from Motorworks.
Which fits OK.
Logged

RSMike

  • Guest
Re: /7 Seat
« Reply #9 on: September 05, 2011, 05:55:09 AM »
Hi, I hope they did not send you a /6 seat, as that was what happened when I ordered from BMW Bayer, I had to send it back to get it changed for a /7 seat.

The /6 seat is a couple of inches longer and hangs out over the tail light which prevents it from seating properly. (pic attached)
The bayer part no. on the underside of the /6 seat was 5253061

The /7 seat is shorter and should just barely clear the tail light.

I don't think there should be any difference between the 1980 and 81 rear sub-frame, so would be surprised if this is the problem.

If you are having trouble getting the hinges under the frame, there is a knack, slide the front hinge under the frame first and then maneuver the rear hinge under the frame with the seat in the down position, once both hinges are under the frame open it up to locate the hinge onto the pins.

Logged

Offline NorR65

  • Lives in Foothills of Mt. Olympus
  • **
  • Posts: 107
  • I Love YaBB 2!
Re: /7 Seat
« Reply #10 on: September 05, 2011, 12:34:23 PM »
It looks like your /7 seat. And the sticker is marked with /7 seat.
May be it has got the wrong sticker.
Some day I have to take of my comfort seat and check this out.
I bought the seat nearly a year ago, it is a little too late to complain to Bayer.
Logged
Pages: [1]
« previous next »