vacuum ports

[Vegasrandall]

does my 1980 w/ the smog fittings have vacuum ports for balancing the carbs?

[montmil]

If you have Bing CV carbs, the vacuum ports are on the bottom of the carb; usually closed off by a short, closed end rubber tube or a small screw.

Monte

[Crossrodes]

My '79 which has the flat top Bing carbs has a screw in a pipe at the bottom of the carb.  Your '80 may be the same.

[Rob Valdez 79 R65]

[montmil]

Thanks for the photo, Rob. I searched my pic files for something similar and never found nada.

Monte

[Vegasrandall]

didn't peek under there,thanks

[montmil]

The 'search' feature ain't working for me.

I was looking for the El-Cheapo Bing Vacuum Adjustment Tool so Randall could get ready for a tune.

Monte

OK, here's the good one from Hugh Kenny of the Airheads Beemer Club:

http://www.airheads.org/content/view/183/98/