Engine Removal Part 2

[Nice_One_Son]

Hi All,

Well, it's been a big day today, engine is now out and the wiring loom has almost been stripped out.

I got in contact with the original owner of the bike who is n engineer and he helped me get the engine out. It sure is going to be fun putting it back in, now I understand the part about lots of covering tape on the frame... :-?

Next up will be the bars, switchgear and then the front end.

Cheers

[montmil]

And your shop helper brings you tea or coffee or...?

After painting the frame and ready to refit the engine, that's when the tape will be appreciated.

Monte

[Semper Gumby]

OOOOOgh! Original Shocks that are screeming "replace meeeeee"  

[montmil]

OOOOOgh! Original Shocks that are screeming "replace meeeeee"  

Hagons would do nicely.     Monte

[nhmaf]

Carefully check the status of your centerstand mounts and pivot bolts while you've got everything this far apart - it is MUCH easier to fix up anything necessary in this condition (such as possible welding, bolt replacement (use the proper OEM or hardened bolt replacement (Grade 8, I believe)).