The member photo gallery is now integrated and live!!  All user albums and pictures have been ported from old gallery.


To register send an e-mail to admin@bmwr65.org and provide your location and desired user name.

« previous next »
Pages: [1]

Author Topic: Hall sensor tester  (Read 1118 times)

Offline jamestnewsonr65

  • Lives in Foothills of Mt. Olympus
  • **
  • Posts: 232
Hall sensor tester
« on: June 25, 2018, 04:14:23 PM »
I’ve hd a problem with my bike which seemed to point to the hall sensor, but turned out to be a faulty coil, but I used one of the original Bmw HES testers to test the HS.

Does anyone have any info on how to make one of these? I’ve seen a version for the oilheads but not the airheads.
Logged
1983 R65LS completely refurbished to my liking.
1985 R80 nearly stock rebuild (basically new bike).
1981 R65 (box of bits).

Offline Tony Smith

  • Mt. Olympus Resident
  • ****
  • Posts: 2331
  • Graduate, Wallace and Gromit School of Engineering
Re: Hall sensor tester
« Reply #1 on: June 25, 2018, 04:32:36 PM »
https://robfrankham.com/hall-effect-tester

Or you can just buy one for $US35 from euromotorelectric.

Logged
1978 R100RS| 1981 R100RS (JPS) | 1984 R65 | 1992 KLE500 | 2002 R1150GSA |

Offline jamestnewsonr65

  • Lives in Foothills of Mt. Olympus
  • **
  • Posts: 232
Re: Hall sensor tester
« Reply #2 on: June 25, 2018, 04:55:09 PM »
Thanks Tony. I thought they would be more than that.

I think I have all the bits needed laying around so I might make one.
Logged
1983 R65LS completely refurbished to my liking.
1985 R80 nearly stock rebuild (basically new bike).
1981 R65 (box of bits).
Pages: [1]
« previous next »