The member photo gallery is now integrated and live!!  All user albums and pictures have been ported from old gallery.


To register send an e-mail to admin@bmwr65.org and provide your location and desired user name.

Author Topic: Neutral => RPM:1000, 1st gear => RPM:650 or stop..  (Read 1811 times)

Offline guyom

  • Lives in Foothills of Mt. Olympus
  • **
  • Posts: 100
Neutral => RPM:1000, 1st gear => RPM:650 or stop..
« on: May 08, 2018, 08:29:36 AM »
hi Guys, since one week got a "new" situation on my bike (R65-1981) :

when the bike is in neutral, everything fine, normal RPM. but since i put the 1st gear.. RPM drops... to low (650) and half of the time the motor stops (except with a bit of gaz.. which is not practical...).

When i downshift... if i miss the neutral.... and stop in 1st Gear.. neutral is really difficult to find.. the bike also want to run and i have to maintain it... so well any ideas ? does it come from the carbs... and some kind of air flow or i do not know what, comes from the clutch... and what to do or come from the gear box... (and to be honest... the first is closed to be dead ;-) but works again.

Thanks for time
Guillaume

Offline georgesgiralt

  • Mt. Olympus Resident
  • ****
  • Posts: 1388
  • I Love YaBB 2!
Re: Neutral => RPM:1000, 1st gear => RPM:650 or stop..
« Reply #1 on: May 08, 2018, 11:25:55 AM »
Hello,
Looks like your clutch is grabbing.
Why ? That's the question ...
Maybe the lever and cable play are not set up properly or the disk has gotten oil on it making it stick or the clutch spring is worn, or .... or ...
I for one would adjust the cable play and see what comes out of it.
Then will report back.

Offline guyom

  • Lives in Foothills of Mt. Olympus
  • **
  • Posts: 100
Re: Neutral => RPM:1000, 1st gear => RPM:650 or stop..
« Reply #2 on: May 08, 2018, 12:07:03 PM »
thanks for answer. i will try the cable !

Offline Barry

  • Mt. Olympus Resident
  • ****
  • Posts: 5142
Re: Neutral => RPM:1000, 1st gear => RPM:650 or stop..
« Reply #3 on: May 08, 2018, 01:06:31 PM »
I agree with Georges. Both the rev drop and the difficulty in finding neutral point to the clutch dragging.
Barry Cheshire, England 79 R45

Offline guyom

  • Lives in Foothills of Mt. Olympus
  • **
  • Posts: 100
Re: Neutral => RPM:1000, 1st gear => RPM:650 or stop..
« Reply #4 on: May 08, 2018, 01:49:21 PM »
any suggestions or adjustment ? i worked on the cable this afternoon no road test yet :-)

Offline Barry

  • Mt. Olympus Resident
  • ****
  • Posts: 5142
Re: Neutral => RPM:1000, 1st gear => RPM:650 or stop..
« Reply #5 on: May 08, 2018, 03:00:18 PM »
Regardless that it doesn't seem intuitive, do it exactly as described in the handbook:  Use the knurled adjuster at the handlebar end of the clutch cable to set 201 mm of exposed inner cable at the gearbox end, then use the adjuster on the gearbox end clutch actuating lever to set 2 mm of free play at the handlebar lever.
« Last Edit: May 08, 2018, 03:03:35 PM by bhodgson »
Barry Cheshire, England 79 R45

Offline Tony Smith

  • Mt. Olympus Resident
  • ****
  • Posts: 2331
  • Graduate, Wallace and Gromit School of Engineering
Re: Neutral => RPM:1000, 1st gear => RPM:650 or stop..
« Reply #6 on: May 08, 2018, 04:01:40 PM »
Quote
when the bike is in neutral, everything fine, normal RPM. but since i put the 1st gear.. RPM drops... to low (650) and half of the time the motor stops (except with a bit of gaz.. which is not practical...).



Could you do something for me please? With the engine stopped, put the bike into 1st gear. Now pull in the clutch and hold it, now push the bike. Is it hard to push?
1978 R100RS| 1981 R100RS (JPS) | 1984 R65 | 1992 KLE500 | 2002 R1150GSA |

Offline guyom

  • Lives in Foothills of Mt. Olympus
  • **
  • Posts: 100
Re: Neutral => RPM:1000, 1st gear => RPM:650 or stop..
« Reply #7 on: May 09, 2018, 10:42:12 AM »
i will try that this weekend  and report ! thanks for advises !