The member photo gallery is now integrated and live!!  All user albums and pictures have been ported from old gallery.


To register send an e-mail to admin@bmwr65.org and provide your location and desired user name.

« previous next »
Pages: [1]

Author Topic: front brake pressure switch question  (Read 728 times)

disco51

  • Guest
front brake pressure switch question
« on: August 12, 2016, 08:20:20 AM »
Anyone have this fail on their bike?
When it fails, does it typically stay always on (brake light on) or always off (brake light won't work when squeezed).
Logged

Offline Bob_Roller

  • Global Moderator
  • Mt. Olympus Resident
  • *****
  • Posts: 9122
  • -7 hours GMT
Re: front brake pressure switch question
« Reply #1 on: August 12, 2016, 09:56:10 AM »
I would say a common failure would be the Iight not coming on  when the brake lever is pulled .

You need to check the switch with a multimeter and see what what you get .

With the brake not applied the switch sbould be open, with the brake applied the switch should be closed .
Logged
'81 R65
'82 R65 LS
'84 R65 LS
'87 Moto Guzzi V65 Lario
'02 R1150R
Riding all year long since 1993 .
I'll give up my R65, when they pry my cold dead hands from the handlebars !!!!!

Offline Tony Smith

  • Mt. Olympus Resident
  • ****
  • Posts: 2331
  • Graduate, Wallace and Gromit School of Engineering
Re: front brake pressure switch question
« Reply #2 on: August 12, 2016, 06:53:27 PM »
Quote
Anyone have this fail on their bike?
When it fails, does it typically stay always on (brake light on) or always off (brake light won't work when squeezed).

The experience of others may vary but I have head brake pressure switches fail "open" and fail "closed" so I would not express an opinion as to whether one is more likely than the other.

What I will say is that they are generally reliable, fail rarely and are easily and cheaply replaced.
Logged
1978 R100RS| 1981 R100RS (JPS) | 1984 R65 | 1992 KLE500 | 2002 R1150GSA |

disco51

  • Guest
Re: front brake pressure switch question
« Reply #3 on: August 13, 2016, 08:44:04 PM »
Tested the switch for continuity and it is faulty.
Of note, the pressure switch that snowbum recommends from Napa (SL 143) leaked like a sieve after install.  The depth seems to be wrong.  Ordered the OEM today.
Guess it will be time to bleed the brakes with some new brake fluid.
FYI, mine failed with the brake lights on continuously.
Logged
Pages: [1]
« previous next »