The member photo gallery is now integrated and live!!  All user albums and pictures have been ported from old gallery.


To register send an e-mail to admin@bmwr65.org and provide your location and desired user name.

« previous next »
Pages: 1 [2]

Author Topic: Dual front disc distribution splitter  (Read 2465 times)

Offline Luca

  • Newbie
  • *
  • Posts: 27
  • Taking my time as quick as I can
Re: Dual front disc distribution splitter
« Reply #15 on: March 02, 2014, 02:50:18 AM »
In theory that would work, but the bleeders screws have a smaller thread diameter than the line fittings.  Sourcing a hose might be difficult, and the internal diameter of the line, if available, would probably be very small and more prone to blockage.
Logged
'82 R65LS
'01 K1200RS

Offline crguy

  • Newbie
  • *
  • Posts: 67
Re: Dual front disc distribution splitter
« Reply #16 on: March 02, 2014, 11:51:14 AM »
Ah..good point.
Logged

Offline Bob_Roller

  • Global Moderator
  • Mt. Olympus Resident
  • *****
  • Posts: 9124
  • -7 hours GMT
Re: Dual front disc distribution splitter
« Reply #17 on: March 02, 2014, 12:25:06 PM »
I've seen some methods of doing this, using lines with ' banjo ' fittings and hollow bolts at the caliper, so you leave the bleeder port alone .
Logged
'81 R65
'82 R65 LS
'84 R65 LS
'87 Moto Guzzi V65 Lario
'02 R1150R
Riding all year long since 1993 .
I'll give up my R65, when they pry my cold dead hands from the handlebars !!!!!
Pages: 1 [2]
« previous next »