The member photo gallery is now integrated and live!!  All user albums and pictures have been ported from old gallery.


To register send an e-mail to admin@bmwr65.org and provide your location and desired user name.

« previous next »
Pages: [1]

Author Topic: wheel/hub/bearing question  (Read 897 times)

yomama

  • Guest
wheel/hub/bearing question
« on: May 29, 2010, 10:59:44 PM »
The bike is a '83 R65.  I'm in the process of replacing the front wheel bearings.  When taking the old bearings out there were two plastic nylon pieces that fit onto the ends of the sleeve in the center.  These two pieces don't seem to have anything to do with setting the preload on the bearings.  Anyone know what their purpose is.  Thanks.  jep

Logged

Offline montmil

  • Mt. Olympus Resident
  • ****
  • Posts: 8371
Re: wheel/hub/bearing question
« Reply #1 on: May 30, 2010, 07:30:13 AM »
The nylon-ish rings simply position the spacer tube and permit the easy replacement of the axle.

You're correct, Jeb. The rings do not factor into the bearing preload sequence.

Monte
Logged
Monte Miller
Denton, TEXAS
1978 BMW R100S
1981 BMW R65
1983 BMW R65
1995 Triumph Trophy
1986 VW Cabriolet

yomama

  • Guest
Re: wheel/hub/bearing question
« Reply #2 on: May 30, 2010, 10:56:51 AM »
Thanks Monte, have a good holiday weekend.  jep
Logged
Pages: [1]
« previous next »