The member photo gallery is now integrated and live!!  All user albums and pictures have been ported from old gallery.


To register send an e-mail to admin@bmwr65.org and provide your location and desired user name.

« previous next »
Pages: [1]

Author Topic: Diode board schematic needed  (Read 678 times)

Breezerider

  • Guest
Diode board schematic needed
« on: February 04, 2010, 06:47:41 PM »
Anyone have a lead to a schematic diagram for the R65 diode board?  The Haynes manual wiring diagram does not show the diode board, just two diodes in the wiring harness which is not where they are physically located.  A new diode board is $150, a new Radio Shack diode is $3.
Logged

Offline Rob Valdez 79 R65

  • Newbie
  • *
  • Posts: 96
  • I Love YaBB 2!
Re: Diode board schematic needed
« Reply #1 on: February 04, 2010, 07:03:22 PM »
Here are three that I found:

http://www.hazmat.com/~mjb/candm/regulator.html

If you go to the root in the address, it can be a little hard to find! lol!


Here is another link, from a source I know much mo betta':
http://www.frankhams.freeserve.co.uk/testing_the_diode_board.htm


And one more!

http://www.buchanan1.net/charge.shtml

« Last Edit: February 04, 2010, 07:09:47 PM by Rob_Valdez_79_R65 »
Logged

Offline Bob_Roller

  • Global Moderator
  • Mt. Olympus Resident
  • *****
  • Posts: 9124
  • -7 hours GMT
Re: Diode board schematic needed
« Reply #2 on: February 05, 2010, 08:55:24 AM »
I don't know if you are familiar with the diodes in the rectifier circuit, but they are not the black cylindrical diodes that you find in common electrical consumer products .

These are about .5-.75 inches in diameter, with a metal case, that are pressed into the diode board .
« Last Edit: February 05, 2010, 09:41:08 AM by Bob_Roller »
Logged
'81 R65
'82 R65 LS
'84 R65 LS
'87 Moto Guzzi V65 Lario
'02 R1150R
Riding all year long since 1993 .
I'll give up my R65, when they pry my cold dead hands from the handlebars !!!!!
Pages: [1]
« previous next »