You have to remove the whole assembly the inner drive part cannot be purchased alone. You first remove a small bolt at the transmission end ( it also holds the ground cable for the battery), it goes through a groove in the cable housing end fitting, and remove the entire assembly the rubber boot and a black plastic bushing that goes into the transmission. If you have a digital camera, or video recorder, take several photos to show the routing. Then remove the cable and outer housing from the indicator and pull it off of the bike. If the rubber boot at the transmission end doesn't come with the cable, you need to buy one of these as well. The bolt you removed, is also the vent for the transmission, so make sure the small hole in it is clear. Price for the cable assembly is $16-20, so not too expensive to replace.