Threaded stud

[stockman]

On the left side of the motorcycle where the clamp going around the exhaust pipe is attached to a stud1/2" in dia roughly. Is that stud removable? Could I get a longer one? I'm adding a side stand I picked up locally from a BMW repair shop and really would like to have that stud 1/2" longer to accommodate the the bracket that the clevis for the stand is mounted to. It's not entirely necessary, I could maybe find a hex nut that is shorter or use a nyloc nut. Anyone know?

[wilcom]

I think your talking about the thru bolt that mounts the engine, It has a nut on both ends, loosen the right side and tap it farther to the left so you'll have more bolt to work with.

[stockman]

Ok great that's perfect. Never would have thought it's that simple. Thanks

[stockman]

What would be the appropriate torque for the engine mounting bolts?
Just to make sure I don't have them too tight or loose.

[montmil]

Your shop manual will have all the torque specs you'll need.

Monte

[stockman]

Yes I know.