16mm Master Cylinder Rebuild Kit

[Mike V]

Anybody know of a good affordable source for a 16mm (rectangular bar mounted) Master Cylinder Rebuild Kit?

1981 R65 w/dual ATE'
-Mike V.

[Justin B.]

£29.00, around $46, at Motobins...  Your pretty limited on where this can be purchased from.   I wonder if anybody has tried Magura for rebuild parts?

[wirewrkr]

Justin, why would you say he's limited?
It's $66.00 here in the states.
as a matter of fact I'll sell this one. It's brand new, in the package.
$48.00 includes the shipping to San Diego.
I'm out in Joshua Tree.
mail me at wirewrkr@gmail.com

[Mike V]

Thanks wirewrkr.  I'll contact you PM.

-Mike V.

[Justin B.]

Any time you are tied to a specific supplier for a part your choices are extremely limited and usually expensive...

[montmil]

For Brembo caliper and master cylinder parts, rebuild kits and complete assemblies at competitive prices, check out Bevel Heaven... as in Ducati, or MG Cycle... as Moto Guzzi.

http://shop.bevelheaven.com/SearchResult.aspx?CategoryID=35

http://www.mgcycle.com/index.php?cPath=110&osCsid=b0b92b623eb248e0e2114be092c8a4e9

Monte

[Mike V]

Thanks Monte,

Those are two links I'll keep in my favorites since they are new to me.  I'm assuming the M/C is an ATE' since the OEM dual disc setup is ATE' but I could find no manufacturer markings on the rectangular M/C unit except for the spool (piston-bore) size.  Maybe something new will be exposed when I get the unit cleaned-up. I found a new rebuild kit from wirewrkr, now to acquire a new reservoir o-ring.  This is a secondary extra M/C unit I'm hanging on to as a spare so I'm in no hurry to get the rebuild done.  

Thanks guys for all the info and help.

-Mike V.

[wirewrkr]

BMW master cylinders are made by MAGURA of Germany.

[Semper Gumby]

Do they make a round resevoir 15mm master cylinder?

My 16mm is too much.

Thanks in advance.