I had the seat custom made by Euroglass in Christchurch.The streettracker seats are all too narrow for the BMW,and I was going to have to modify one to fit.But I knew Dave had an XR750 seat mold,and asked if he could make one to my measurements.He could do better than that,he had a BMW there,and would make it to fit.I expected some finishing work,but it came painted,pinstriped and BMW logoed,and I just had to drop it on.
It has a tube at the front,and this slots up into the tank tube,the rear mounts to the subframe by 2 bolts.There are rubber buffers to take the weight onto the frame rails.I can still use the tool tray,but it has been modified a little.
I love it,it cleans up the bike,and defines my intentions.It allows me to move around on the bike more - up front for corners,and back with feet on pillion pegs for longer straights.I can swap over to the stock seat and guard in 30 mins,if I want to carry a pillion,or use a seat pack.