I'm on my second tank of "mid" grade fuel, 89 octane in Canada. Â I didn't notice any difference. Â
According to the Haynes manual, the US model has a lower compression.
Is everyone else using premium fuel?
If I may I'd like to partially hijack your thread, I'm interested in what fuels are actually in use around the world.
In my corner of Australia you have the choice of:-
"Standard ULP" = 92 Octane
"E10" (10% ethanol) = 94 Octane
"Hi-Octane" = 94~96 octane depending on brand
"Premium" = 98 Octane (not available in all brands"
"Opal" = 91 Octane. Modified Avgas with a Green dye - sold in some communities where petrol sniffing is endemic - the lower volatility of Opal makes it useless for sniffing.
Avgas 100 Octane "Low Lead" aka IATA 100LL. A misnomer as although a "low lead' fuel by aviation standards, it still has more than twice as much TEL in it than the old leaded "super" ever had.
I'd be interested what fuels are generally available elsewhere.
For the record my R65 runs 1979/80 pistons in iron bores with heavily modified heads that fortunately have more or less post 1981 combustion chamber volume - I am therefore running slightly less compression than a stock post 1981, but more than a 1979/80.
My R65 loves Avgas, and feels quite "snappy" with it but as it is expensive and illegal to run in a road going vehicle, it is a rare treat.
It runs just fine on 92 Octane. Every once in a while I treat it to a tank of PULP, generally because all the other pumps are in use and the extra $2.50 for a tank full doesn't worry me.
Can't say I notice too much difference in performance on PULP, but i imagine that it is there.
Following two very, very annoying and expensive outcomes following the use of ethanol blends in motorcycles I will not use E10 under any circumstances.
I use "valve saver" lead replacement additive, more out of hope than anything else. I try to keep 20 lt of Avgas on hand and throw a litre or so in every few tankfuls, hopefully one or the other will stave off valve seat recession.