79 R65 exhaust diameter

[67siia]

Stock pipes, I'm ordering slip on pipes I meassure 35mm is this correct? I'm questioning because the supplier offered the 44.5mm with reducers... Just wondering if I messured incorrectly the

[Barry]

35mm is correct.  Other airheads are 38mm with some R100's 40mm.

[67siia]

Barry, cheers!

[castledener]

I've just fitted some short "silencers" made primarily for British bikes.They came with 3 reducers,they didn't grip the exhaust pipe,looked ugly too,then I found some reducers,on ebay, stainless 100mm long 35mm inside dia stepped up to 41.27 mm outside dia.The silencer fitted perfect the exhaust pipe side I had to slot with my dremel.The overall fit in my opinion is good,the sound awesome.They come in different sizes tooThe pair for £18. free P&P.I'll post a couple of pics if anyone is interested

[67siia]

Pics please and if possible the eBay link.  

I've just fitted some short "silencers" made primarily for British bikes.They came with 3 reducers,they didn't grip the exhaust pipe,looked ugly too,then I found some reducers,on ebay, stainless 100mm long 35mm inside dia stepped up to 41.27 mm outside dia.The silencer fitted perfect the exhaust pipe side I had to slot with my dremel.The overall fit in my opinion is good,the sound awesome.They come in different sizes tooThe pair for £18. free P&P.I'll post a couple of pics if anyone is interested

[castledener]

I'll try to post a couple of pics.The dimensions I gave should have been 35mm inside dia and around 44 mm outside dia.ebay (UK) item sold by everyexhaustpart item number 131261459312.I polished mine with wire wool grade 0000 and metal polish,really good finish

[castledener]

If it would help I could buy a pair of reducers and ship them to you at cost.Regards Neil

[67siia]

Castledener much appreciated. I'll go to my local exhaust shop and buy a 3mm sleeve. I would expect it to be only a few $.