The member photo gallery is now integrated and live!!  All user albums and pictures have been ported from old gallery.


To register send an e-mail to admin@bmwr65.org and provide your location and desired user name.

« previous next »
Pages: [1]

Author Topic: Removing piston from caliper  (Read 815 times)

erod1

  • Guest
Removing piston from caliper
« on: August 18, 2013, 04:31:12 PM »
So I took apart the brembo caliper on my 86 r65 to rebuild the leaky caliper. But I cannot figure out how to remove the piston. I have tried to pull on the ceramic part of the piston and pieces just chip off. Any help will be appreciated .
Logged

Offline Bob_Roller

  • Global Moderator
  • Mt. Olympus Resident
  • *****
  • Posts: 9124
  • -7 hours GMT
Re: Removing piston from caliper
« Reply #1 on: August 18, 2013, 04:40:54 PM »
Compressed air is about the only way to get it removed once the caliper is removed from the bike .

If you do it, place the caliper inside a large plastic bag with some old shop rags to keep it from going too far when it does come out .

Fluid will go everywhere when you do this, so be prepared for it !!!!!
Logged
'81 R65
'82 R65 LS
'84 R65 LS
'87 Moto Guzzi V65 Lario
'02 R1150R
Riding all year long since 1993 .
I'll give up my R65, when they pry my cold dead hands from the handlebars !!!!!

erod1

  • Guest
Re: Removing piston from caliper
« Reply #2 on: August 18, 2013, 05:38:18 PM »
Thanks. While having diner I thought about compressed air. They came out. Now to order parts.
Logged
Pages: [1]
« previous next »