The member photo gallery is now integrated and live!!  All user albums and pictures have been ported from old gallery.


To register send an e-mail to admin@bmwr65.org and provide your location and desired user name.

« previous next »
Pages: [1]

Author Topic: inTorque settings ?  (Read 906 times)

larstorders

  • Guest
inTorque settings ?
« on: August 29, 2007, 11:07:11 AM »
Hi. I just returned to R65 ownership and am fitting new fork seals to the little gem I found. Can someone please tell me what I should torque the 12 mm allen bolt to, which holds the fork slider on from the bottom. I promise I'm not too tight fisted to buy a workshop manual, I ordered one weeks ago but it's lost in the mail, Aaargh!
Many thanks.
« Last Edit: August 29, 2007, 11:07:48 AM by larstorders »
Logged

Offline Bob_Roller

  • Global Moderator
  • Mt. Olympus Resident
  • *****
  • Posts: 9121
  • -7 hours GMT
Re: inTorque settings ?
« Reply #1 on: August 29, 2007, 11:16:13 AM »
The only reference I can find in my BMW shop manual is :Absorber in sliding tube screw - torque 35 +/- 5 Nm, or 26 +/- 3.6 ft/lbs.  No pictures of course ! A couple of pages were out of order, and found an exploded view of the fork, and the  torque value I quoted is for the allen head screw/bolt at the bottom of the fork assembly.
« Last Edit: August 29, 2007, 11:19:09 AM by Bob_Roller »
Logged
'81 R65
'82 R65 LS
'84 R65 LS
'87 Moto Guzzi V65 Lario
'02 R1150R
Riding all year long since 1993 .
I'll give up my R65, when they pry my cold dead hands from the handlebars !!!!!

larstorders

  • Guest
Re: inTorque settings ?
« Reply #2 on: August 30, 2007, 03:26:54 AM »
Thanks Bob. Forks reassembled now.
Logged
Pages: [1]
« previous next »