The New And Improved Unofficial R65 Forum V2
General Category => Chit-Chat => Topic started by: Lucky_Lou on September 21, 2009, 12:44:27 PM
-
Came across this at the hardware store.....has anyone used them, if so are they any good.
http://www.dronco.com/xist4c/web/Our-new-polishing-wheel_id_25883_.htm
ta Lou
-
Not seen that type of wheel before Lou. Looks like an abrasive flap disc but with something like scotch brite type material.
I used to think that 3M scotch brite material was just non woven nylon fibre with the sharp fibre itself providing the cleaning/abrasive action. They are actually coated with fine abrasive particles held in a resin binder. Thats why they are stiff and work well when new.