The New And Improved Unofficial R65 Forum V2

Technical Discussion => BMW Technical Q&A, Primarily R65 => Topic started by: tunnelrider on May 31, 2017, 06:16:52 AM

Title: Cable protection covers
Post by: tunnelrider on May 31, 2017, 06:16:52 AM

Hello all, first time I've posted on this board so I hope my post isn't too far out of what's supposed to be here.  I'm wondering what I could use for extra protection for a clutch cable under the instrument housing and around the steering/frame area.  Would heat shrink work or is a rubber slip over better?  Thanks for any information. Cheers.

Title: Re: Cable protection covers
Post by: marcmax on May 31, 2017, 10:12:26 AM

Mine actually has a short length of black vinyl vacuum tube slid over it and held in place with a couple of dabs of silicone sealer. Don't know if it was necessary but it works.

Title: Re: Cable protection covers
Post by: Justin B. on June 01, 2017, 10:11:24 AM

[movedhere] Misc. Technical Discussion [move by] Justin B..