The New And Improved Unofficial R65 Forum V2

Technical Discussion => BMW Technical Q&A, Primarily R65 => Topic started by: black pearl on December 01, 2016, 08:32:31 PM

Title: Rear wiring harness connector
Post by: black pearl on December 01, 2016, 08:32:31 PM

Can anyone advise what the 6 pin connector used for the rear lights wiring harness is and whether they can be bought separately new?

Cheers

Title: Re: Rear wiring harness connector
Post by: Justin B. on December 01, 2016, 09:36:26 PM

They kinda look like a Molex connector.

Title: Re: Rear wiring harness connector
Post by: mrclubike on December 01, 2016, 10:34:39 PM

Are you talking about this
Max BMW has them
It only looks like you can get the blue in female and male so you will need to replace the pair

Title: Re: Rear wiring harness connector
Post by: georgesgiralt on December 01, 2016, 11:34:26 PM

Actually, all are available at your BMW dealer !
black (above) 61 13 1 243 297  4.07€
white              61 13 1 243 298  4.07€
Red                 61 13 1 243 299  0.69€
Blue                61 13 1 362 144  4.07€
The pin is 3.5 mm dia P/N 61 13 1 342 144 (male) and cost 1.07€ apiece... The female pin seem to be P/N 61 13 1 359  289 at 2.96€ each
There are/was also a gray one 61 13 1 243 300 (0.69€) and a beige one 61 13 1 243 675 both unavailable if I'm not mistaken.
P.S. : these are the male connectors. The female (the one from the harness that clips on the chassis of the bike) are NLA as far as I know.

Title: Re: Rear wiring harness connector
Post by: black pearl on December 05, 2016, 09:18:51 PM

Thanks Guys

Will follow up with the local dealers