The New And Improved Unofficial R65 Forum V2

Technical Discussion => BMW Technical Q&A, Primarily R65 => Topic started by: Session101 on July 24, 2012, 09:31:02 PM

Title: bing carb choke question
Post by: Session101 on July 24, 2012, 09:31:02 PM

so after rebuilding my carbs, the bike runs fine but i guess it has an air leak on one of the carbs, and i believe its the choke, no does anyone know how to properly set the choke on the bing carbs? all my diagrams don't show the proper position it needs to be in when I installed it. I just need pictures and how to tell which is the proper up and down on the wheel.

Title: Re: bing carb choke question
Post by: Barry on July 25, 2012, 10:51:50 AM

Take a look in our FAQ section.

http://www.bmwr65.org/cgi-bin/yabb2/YaBB.pl?num=1291933920