The New And Improved Unofficial R65 Forum V2
Technical Discussion => BMW Technical Q&A, Primarily R65 => Topic started by: kikoth on May 08, 2007, 06:42:08 AM
-
Hello everybody,
It's time for me to change my clutch disk, and take the occasion to verify everything in this area is ok. :-[
i got an offer for a cheap brand new disk, R80RT, but i would like to be sure...
Did anybody in there recently change his clutch disk AND remember the BMW
numbers of this part ? ( didn't start yet to dismantle it...) it could help... and of course it's quite urgent !!! ;D
thanks by advance, [smiley=beer.gif]
have a nice day,
Chris
-
Not sure what the BMW part number is but Motobins part no for gen BMW is 30400 and they send to France. As I had a rear break arm snap when Fi & I were at her dads house in Cognac and they sent me one in three days.
Hope this helps
Tony
-
hi Thrang,
thanks for your so quick answer, it will help...
hope that even if you had problems with the bike, you keep a good memory of Cognac ??? ;D [smiley=1drink.gif]
thanks again,
best regards,
chris
-
Cognac was great, although I've had a couple of bad experience with the AA's French contractors in the past, I enjoy riding in France. Especially the mountain roads :)
-
I can understand you like the mountain's roads, as i do... ;)
but what does " AA's french contractors means ???
-
Try http://www.tannis.dk/bmw/spareparts.htm for reference numbers.
greetings from a showery north
trolle
-
Hi Trolle,
Many thanks for this GREAT address !!!
i wish you more sun !!! ( and a lot of beers ... ) [smiley=beerchug.gif]
have a nice day,
chris