The New And Improved Unofficial R65 Forum V2

Technical Discussion => BMW Technical Q&A, Primarily R65 => Topic started by: Bob_Roller on April 25, 2007, 03:43:16 PM

Title: Clutch Alignment Tool
Post by: Bob_Roller on April 25, 2007, 03:43:16 PM

While I was at the shop that's doing my clutch overhaul, I noticed they had a display rack of plastic clutch alignment tools. I havn't remembered to get one yet, I requested the dimensions on the old forum, and I copied it, but now I can't find it, I thought I filed it away with the rest of my paperwork for my R65, but it's gone now. So can I request another copy of these dimensions? I'll take it back when I pick up my clutch , and see if they have one that will do the job.

Title: Re: Clutch Alignment Tool
Post by: airhead on April 25, 2007, 06:10:58 PM

Which bike do you have, the older flywheel model or the later lighter clutch carrier type? They are different.

Bill......................;-)

Title: Re: Clutch Alignment Tool
Post by: Bob_Roller on April 25, 2007, 10:43:08 PM

It's the lighter flywheel.

Title: Re: Clutch Alignment Tool
Post by: airhead on April 25, 2007, 11:06:58 PM

Check out this forum, it has the measurements a little way down. Hope it helps.

http://www.bmbikes.org.uk/Forum/viewtopic.php?t=3760

Bill......................;-)

Title: Re: Clutch Alignment Tool
Post by: Justin B. on April 26, 2007, 07:30:11 AM

If a bunch of you want one of these I'll work up to see much it costs to make one.