The New And Improved Unofficial R65 Forum V2
Technical Discussion => BMW Technical Q&A, Primarily R65 => Topic started by: R65Singh on September 03, 2009, 08:12:44 PM
-
Hello All...was working on my bike and putting all the things together after installing timing chain and dropped the alternator and broke one of the Carbon brushes > :(. Not sure if I can just buy one brush or the whole unit needs to be replaced. Any ideas?...Thanks
-
If you have an alternator/generator/starter repair shop in the vicinity, stop by with the brushes, they should be able to supply a replacement set, for minimal cost .
I would replace both brushes, instead of just one .
Worse case scenario, Motorrad Elektrik, Euro Motoelectrics can supply them for around $10 for a set .
www.motoelekt.com
www.euromotoelectrics.com
-
They're cheap. Just buy a pair and refresh both. Then you will avoid having to remember which one will wear out first. ;)
I find a small butane soldering torch makes quick work of soldering on the new braided wire leads.
Monte