The New And Improved Unofficial R65 Forum V2

Technical Discussion => BMW Technical Q&A, Primarily R65 => Topic started by: VaSteve on April 18, 2009, 06:36:05 PM

Title: Odometer stopped working and started again.
Post by: VaSteve on April 18, 2009, 06:36:05 PM
I went for a nice long ride and found that my odometer stopped (I compared it to the bike computer I have on the handlebars).  Originally, I though the bike computer had gone haywire, so I watched the odometer for a while and it didn't change at all.  Then it did.  I went right on trucking like nothing was wrong.  I didn't touch or otherwise do anything to it.  What do you think happened?
Title: Re: Odometer stopped working and started again.
Post by: Justin B. on April 18, 2009, 07:18:48 PM
One cause of odometer malfunction is a little gear inside that slips out of contact with it's mating gear.  It sounds like yours is right on the verge!
Title: Re: Odometer stopped working and started again.
Post by: VaSteve on April 18, 2009, 07:47:16 PM
I had this problem in my 944 and I was able to buy a new gear.  Is there any such replacement or do I have to ship it to VDO/North Hollywood Speedometer to fix it?
Title: Re: Odometer stopped working and started again.
Post by: Bob_Roller on April 18, 2009, 08:15:37 PM
Unless you have a donor speedometer, parts are not available for the internal workings.

If you don't feel like going into the speedometer yourself, typical repair for this is around $180-200.

This usually includes a thorough cleaning, and recalibration.

I was bored at work about a month ago, and found a repair shop in your general area that does repairs on BMW motorcycle speedometers.

Southern Electronics in Richmond, VA.

http://carradio.com/
Title: Re: Odometer stopped working and started again.
Post by: Justin B. on April 18, 2009, 10:45:25 PM
Normally the gear just slips back and you can slide it back where it belongs and put on a drop of adhesive to help keep it put...
Title: Re: Odometer stopped working and started again.
Post by: drewboid on April 20, 2009, 11:15:52 AM
One of the gears slipping on the shaft is the usual cause - see:
https://www.airheads.org/index2.php?option=com_content&do_pdf=1&id=160
for repairs.
Title: Re: Odometer stopped working and started again.
Post by: VaSteve on April 20, 2009, 06:33:46 PM
Quote
One of the gears slipping on the shaft is the usual cause - see:
https://www.airheads.org/index2.php?option=com_content&do_pdf=1&id=160
for repairs.


Cool, good find, but....were there supposed to be photos?
Title: Re: Odometer stopped working and started again.
Post by: drewboid on April 21, 2009, 07:50:24 AM
Yes there should be photos - try this link
http://www.airheads.org/content/view/160/98/
good luck.
Title: Re: Odometer stopped working and started again.
Post by: VaSteve on April 21, 2009, 08:14:48 PM
Cool, thanks.  That's similar to the 944 I worked on, but looks sturdier!