The New And Improved Unofficial R65 Forum V2
Technical Discussion => BMW Technical Q&A, Primarily R65 => Topic started by: Redbaron on July 21, 2025, 04:17:57 PM
-
I thought I was finished but, after finding no power on red wire at ignition switch, I ran a new red wire direct from battery to ignition. All lights work and bike cranks over but it does not have a spark at spark plugs. I rechecked all the electrics and especially the relays, wires, connectors. What would you do next?
-
First step would be to check that +12volts is getting to the ignition coils. With the ignition on there should be +12V at terminal 15 of the rear coil. If not there is a fault somewhere between the ignition switch - stop switch and the coil.
-
I checked ground/earth wires from coils and one was bad. I now have spark! Thanks