The New And Improved Unofficial R65 Forum V2

Technical Discussion => BMW Technical Q&A, Primarily R65 => Topic started by: dogshome on April 04, 2025, 02:25:53 PM

Title: Heikos 7" headlight adaptor
Post by: dogshome on April 04, 2025, 02:25:53 PM

Hi all, don't know if you spotted this on You Tube. Heiko has been 3D printing adaptors for 7" LED modules to fit in the 7 and a bit inch airhead bucket:

https://youtu.be/Tvt-pYJf9EA?si=ho-DToyvzd81NBBU (https://youtu.be/Tvt-pYJf9EA?si=ho-DToyvzd81NBBU)

My friend just made me a couple in the recommended TPU95 - which is a 'hard rubber' feel. Heiko has put the design up for 5$, which is fine as he's done the design and testing. Material is about the same cost. Printing, a few hours!
7" LED units are advertised for Jeep, but probably fit all sorts of vehicles.


Pics to follow.

Title: Re: Heikos 7" headlight adaptor
Post by: dogshome on April 21, 2025, 01:38:09 PM

Sorry for the rubbish pic. Raining heavily outside!

Title: Re: Heikos 7" headlight adaptor
Post by: dogshome on April 27, 2025, 01:11:53 PM

Better pic  :bmw_smiley:

Title: Re: Heikos 7" headlight adaptor
Post by: Justin B. on April 29, 2025, 08:22:40 PM

Nice paint on the fairing!