The New And Improved Unofficial R65 Forum V2

Technical Discussion => R65 Technical FAQ/Procedures => Topic started by: skyblu79 on April 06, 2024, 03:16:36 PM

Title: Crankshaft oil seal rear
Post by: skyblu79 on April 06, 2024, 03:16:36 PM

I installed the crankshaft, the camshaft and now I have to install the rear thrust washer, the rear crankshaft oil seal and then the flywheel.

Does the rear thrust washer need to be oiled before mounting the flywheel?
Is the crankshaft oil seal rear mounted dry or with a little oil, or does it soak in the oil?
Should the flywheel nose be lubricated before being inserted?

Title: Re: Crankshaft oil seal rear
Post by: Bob_Roller on April 06, 2024, 07:07:32 PM

Is this the thrust washer for the crankshaft ?

Title: Re: Crankshaft oil seal rear
Post by: skyblu79 on April 07, 2024, 03:39:13 AM

I share

I found this guide and it seems like a really good job

https://brook.reams.me/bmw-motorcycle-rebuilds/1973-bmw-r755-rebuild-project/11-bmw-r755-remove-replace-flywheel-rear-main-seal-oil-pump-cover-cover-o-ring/